Heat Surge Amish Fireplaces

Accessories

 

Amish Electric Fireplace
Fireless ~ Flameless ~ Smokeless

HEAT SURGE
FIREPLACE INSERT

The Insert unit can replace your existing Wood and Gas Burning Fireplace Grate, providing both pleasant Fireplace atmosphere and/or Heat with Remote Control, plus Thermostat Control.

Size: 21 in. Height x 24 in. Width x 11 in. Depth
Color: Glat Black (powder coat) Paint

Weight: Approx 35 lbs
Current: 120 VAC, 1 A. Min. to 12 A. Max.

INSTALLATION
1. Remove existing Fireplace Grate assembly.
2. Clean out Fireplace Cavity and Spray with "Flat Black" Paint.
3. Close off the existing Chimney and Damper.
4. Measure the Cavity: Height:________ Width:________ Depth:________
5.

Insert Unit:

Height: 21 inches Width: 24 inches Depth: 11 inches
6. Max. 120 volts AC @ 12 amp. current drain
7. If necessary, Purchase a 3-wire #14 Gage AC extension Cord. Existing AC Cord is about 7 ft. in length, from rear of unit.
8. These units normally produce enough heat, at the max. setting to warm about 350 to 400 sq. ft. with the nominal cost of Electrical Power at only 10 cents per hour.

Emmick's Solutions
A KEI-Intl. LLC Company
Located in Arizona since 1972

Mesa Market Place

Baseline Rd. Isle C 171
15550 E. Baseline Road, Mesa Arizona
Nearest Intersection: Baseline Rd. and Signal Butte Rd.

Tel: 928-472-9200 Payson, AZ

or 480 732-0077 Chandler, AZ