INSTANT HOT WATER RECIRCULATING SYSTEM SAVES WATER AND ENERGY

Typical Plumbing Layouts

Option A Click on image for enlargement	Option B Click on image for enlargement
Option "A" Typical plumbing system with persons deciding to install the operating component motor under the "Distant Most Sink," will require an AC Electrical Outlet inside the sink cabinet. If Kitchen sink is distant most sink, quite often an AC outlet already exist. If not, go to Option B.	Option "B" Typical plumbing system will provide capability of "Distant Most Sink" and other sinks from a "Branch Off" from the main water lines and only requires an AC Outlet adjacent to the Water Heater Unit.
Option C Click on image for enlargement

Option "C" typical plumbing system in New Home Construction, with a "Dedicated Return Line" from the "Distant Most Sink" to the base of the Water Heater Unit, and an AC Outlet adjacent to it.

Note: Do not run the Return Line or Hot Water Line next to the Cold Water Line.

NOTE: Installation of the CVA 2 Check Valve Assembly with Option A or B, serving a single, "Most Distant Sink" will determine that the Timing of the Re-Circulation System to be normally, quite satisfactory.

Installation of the CVA 3 with Temperature Control provides both Timing and Temperature control, if desired.

CVA 3 Check Valve Assembly is usually found necessary in cases where a "Branch Off" of the main line is discovered feeding a separate sink needing "Hot Water on Demand" as shown in Option B.

CVA 1 Check Valve Assembly applicable only to Option C.

THERE IS NO SUBSTITUTE
FOR THIS ADVANCED PRODUCT

You Can Trust WATER GUARDIAN
To meet all your Hot Water Recirculation Needs.

In order for a factory representative to assist in choice of best system, and the best current price to fit your residence, we will need to know the type of system needed for your home.

Price range on an Average Home is $250 to $400

To have a System Quote Specifically for Your Home
CLICK HERE!